SCADASCOPE PRICING
SCADASCOPE is a modular system - buy the basic configuration and add modules as you need them. We’ll provide a detailed cost breakdown with accompanying service explanations and diagrams for all products and services before you pay anything.
SCADASCOPE offers the versatility and rapid deployment of battery powered solutions, the increased range and lower maintenance option of mains powered units – or any combination of both. We’ll help establish what’s best for you.
But to give you an insight into SCADASCOPE pricing, this page will provide pricing in Australian dollars, excluding taxes and shipping.
On this page we'll cover Components and Cloud products - for information on Services see the Services Page.
SCADASCOPE PRICING
SCADASCOPE is a modular system - buy the basic configuration and add modules as you need them. We’ll provide a detailed cost breakdown with accompanying service explanations and diagrams for all products and services before you pay anything.
SCADASCOPE offers the versatility and rapid deployment of battery powered solutions, the increased range and lower maintenance option of mains powered units – or any combination of both. We’ll help establish what’s best for you.
But to give you an insight into SCADASCOPE pricing, this page will provide pricing in Australian dollars, excluding taxes and shipping.
On this page we'll cover Components and Cloud products - for information on Services see the Services Page.
Component Pricing
The SCADASCOPE Radio/WiFi Gateway costs $399.00, the Master Controller and all Sensor Controllers cost $299.00 (AUD) each, regardless of whether they are mains or battery powered. The SCADASCOPE 3G Internet Gateway costs $499.00 and requires an ongoing monthly charge to provide GSM network access - contact us to confirm on-going pricing but budget for around $20.00 per month.
Customising the gateway, controller and sensor units to your requirements is a matter of adding the appropriate sensors, switches and control units.
Components Price List
Component Pricing
The SCADASCOPE Radio/WiFi Gateway costs $399.00, the Master Controller and all Sensor Controllers cost $299.00 (AUD) each, regardless of whether they are mains or battery powered. The SCADASCOPE 3G Internet Gateway costs $499.00 and requires an ongoing monthly charge to provide GSM network access - contact us to confirm on-going pricing but budget for around $20.00 per monthfor ther Google Sheets and Apps version of the Control Panel.
Customising the gateway, controller and sensor units to your requirements is a matter of adding the appropriate sensors, switches and control units.
Components Price List
| Description | Unit Price | ||
| Pressure Switch (configurable – minimum pressure 55 psi) | $70.00 | ||
| Flow Switch (Contact 3 /lpm - max flow rate 30 lpm) | $90.00 | ||
| Pressure Sensor (Linear, 5V – 304 SS – range 0 to 240 psi) | $70.00 | ||
| SCADASCOPE magnetic pulse flow isolation valve | $85.00 | ||
| SCADASCOPE Solid State switching controller | $110.00 | ||
| SCADASCOPE Switch Monitor Module | $40.00 | ||
| Pulse Volume Meter (1 pulse / 10 litres) | $280.00 | ||
| Pressure Sensor (4–20 mA – 304 SS – 0 to 240 psi) | $100.00 | ||
- Pressure Switch (configurable – minimum pressure 55 psi)
$70.00
- Flow Switch (Contact 3 /lpm - max flow rate 30 lpm)
$90.00
- Pressure Sensor (Linear, 5V – 304 SS – range 0 to 240 psi)
$70.00
- Pressure Sensor (4–20 mA – 304 SS – 0 to 240 psi)
$100.00
- SCADASCOPE magnetic pulse flow isolation valve
$85.00
- SCADASCOPE Solid State switching controller
$110.00
- SCADASCOPE Switch Monitor Module
$40.00
- Pulse Volume Meter (1 pulse / 10 litres)
$280.00
Component Descriptions and Applications
Pressure Sensors
SCADASCOPE supports two types of pressure sensors, to accommodate battery or mains powered iterations of the sensor control units. Battery operated units require the linear 5 Volt sensors, which operate on ultra-low power and provide highly accurate readings. The standard linear sensor has a 0 to 240 psi range but other ranges as low as 50 psi and up to 400 psi are available upon request.
Mains Powered SCADASCODE units can use either the Linear sensor, or the 4-20 mA type sensors that are common in many industry applications. Where 4-20 mA type sensors are used a second power source, must be provided for the sensor if it requires greater than 12 volts to operate.
The SCADASCOPE Solid Sate Switching Controller
This unit is an intelligent switching module for controlling the SCADASCOPE magnetic pulse solenoid valves or any DC operated external device that that operates using up to 60 volts / 2 Amps. Motor speed control is not supported at this time – but directional control is available.
For AC mains or higher voltage control the Solid Sate Switching Controller supports practically any coil or solid state relay operation, though application will be a custom development and subject to charges outlined on the Services page.
For more information on the Solid State Switching Controller see the Control Functions section on this page.
Magnetic Pulse Solenoids
SCADASCOPE fully support magnetic pulse relay and solenoid technology as it is readily applicable to ultra-low power solutions. The SCADASCOPE Magnetic Pulse solenoids can be Nylon or Brass fittings – in either ½ or ¾ inch port configuration. These may be used with either battery or mains powered SCADASCOPE control units.
SCADASCOPE Switch Monitor Module
Allows you to use SCADASCOPE to monitor the state of physical switches, like Differential Pressure Switches, Light Sensitive UV switches and just about any mechanical or solid state switch you need. The SCADASCOPE Switch Monitor is integrated into your Cloud Control Panel to provide email or SMS alerts when the switch is engaged.
For more information on the SCADASCOPE Switch Monitor see the Control Functions on this page.
Component Descriptions and Applications
Pressure Sensors
SCADASCOPE supports two types of pressure sensors, to accommodate battery or mains powered iterations of the sensor control units. Battery operated units require the linear 5 Volt sensors, which operate on ultra-low power and provide highly accurate readings. The standard linear sensor has a 0 to 240 psi range but other ranges as low as 50 psi and up to 400 psi are available upon request.
Mains Powered SCADASCODE units can use either the Linear sensor, or the 4-20 mA type sensors that are common in many industry applications. Where 4-20 mA type sensors are used a second power source, must be provided for the sensor if it requires greater than 12 volts to operate.
The SCADASCOPE Solid Sate Switching Controller
This unit is an intelligent switching module for controlling the SCADASCOPE magnetic pulse solenoid valves or any DC operated external device that that operates using up to 60 volts / 2 Amps. Motor speed control is not supported at this time – but directional control is available.
For AC mains or higher voltage control the Solid Sate Switching Controller supports practically any coil or solid state relay operation, though application will be a custom development and subject to charges outlined on the Services page.
For more information on the Solid State Switching Controller see the Control Functions section on this page.
Magnetic Pulse Solenoids
SCADASCOPE fully support magnetic pulse relay and solenoid technology as it is readily applicable to ultra-low power solutions. The SCADASCOPE Magnetic Pulse solenoids can be Nylon or Brass fittings – in either ½ or ¾ inch port configuration. These may be used with either battery or mains powered SCADASCOPE control units.
SCADASCOPE Switch Monitor Module
Allows you to use SCADASCOPE to monitor the state of physical switches, like Differential Pressure Switches, Light Sensitive UV switches and just about any mechanical or solid state switch you need. The SCADASCOPE Switch Monitor is integrated into your Cloud Control Panel to provide email or SMS alerts when the switch is engaged.
For more information on the SCADASCOPE Switch Monitor see the Control Functions on this page.
Already got sensors?
If you already operate pressure transmitters, or other control devices like, mechanical differential pressure switches, solenoids, light sensitive switches for UV or even non-pressure related sensors monitoring vibration, heat, turbidity or flow rates, we're keen to help you get that data online. Just contact us and we'll do everything possible to integrate your devices into SCADASCOPE.
Already Got Sensors
If you already operate pressure transmitters, or other control devices like, mechanical differential pressure switches, solenoids, light sensitive switches for UV or even non-pressure related sensors monitoring vibration, heat, turbidity or flow rates, we're keen to help you get that data online. Just contact us and we'll do everything possible to integrate your devices into SCADASCOPE.
Support Allowance
Each SCADASCOPE unit comes with 30 minutes free phone / email support for setup and commissioning – that means 30 minutes for every Radio/WiFi Gateway, Master Controller or Sensor Controller module you buy. The support is non-consecutive, so if you talk to us for 10 minutes, you still have 20 minutes left for any other questions. In most cases this will be more than enough to install and commission your SCADASCOPE solution, with time left over for any questions you may have after you’re up and running. The hours of availability for your Support Allowance are detailed on the Services Page.
Support Allowance
Each SCADASCOPE unit comes with 30 minutes free phone / email support for setup and commissioning – that means 30 minutes for every Radio/WiFi Gateway, Master Controller or Sensor Controller module you buy. 
The support is non-consecutive, so if you talk to us for 10 minutes, you still have 20 minutes left for any other questions. In most cases this will be more than enough to install and commission your SCADASCOPE solution, with time left over for any questions you may have after you’re up and running. The hours of availability for your Support Allowance are detailed on the Services Page.
Cloud Pricing
Scadascope supports two data visualisation options as control panels that attract different pricing.
The simplest and most familiar environment for a Scadascope Dashboard is Google Sheets, with basic graphical and tabular depictions of data, which can be readily imported into your database or Spreadsheet applications – or used in conjunction with the full suite of Google Analytical tools and apps. Scadascope offers Google Sheets (and full G-Suite attributed to a Scadascope user name eg; YourCompany@scadascope.com) for $20.00 per month.
The Ubidots Platform is a fully featured and development enabled API REST environment that allows tiered permissioning for administrators and a wide range of java and HTML options for enhancement and dissemination of your data. Although simple to operate, Ubidots is a powerful data visualisation and control platform that will enable users to customise data to suit the requirements of different types of user, disseminate only what they need to see and provide a wide range of customisable options for display. Scadascope offer Ubidots as a Control Panel option for $85.00 per month.
Both options include email alerts for real-world conditions that you can set to suit your requirements on the dashboard. SMS alerts are also available but need to be costed for each application – budget on an additional $10.00 per month.
Cloud Pricing
SCADASCOPE supports two data visualisation platforms as control panels that attract different pricing. The simplest and most familiar environment for a Scadascope Dashboard is Google Sheets, with basic tabulated data capture that can be readily imported into your favourite spreadsheet and database applications. The Google Sheets option includes the full graphing and visualisation options familiar to Google Drive users and options to use the full suite of Google apps and plugins to export visualise or manipulate data within the G-Suite framework.
Scadascope offers Google Sheets (and a full G-Suite attributed Scadascope account (eg: YourCompany@scadascope.com) for $20.00 per month.
Alternately, Scadascope offers the fully featured Ubidots API REST environment for larger organisations that require more complex analysis features, full Java and HTML development capabilities and tiered user permissioning for data visualisation and dissemination. Scadascope provide the Ubidots Control Panel for $85 per month. Both options include two way communication for data capture, remote device control and email alerts that are user defined to respond to real-world conditions like differential pressure thresholds, overheating or fluids turbidity. SMS alerts are also available for an additional $10.00 per month.
FOR MORE INFORMATION ON PRICING YOUR SCADASCOPE SOLUTION CALL US OR EMAIL...
FOR MORE INFORMATION ON PRICING YOUR SCADASCOPE SOLUTION CALL US OR EMAIL...
