HOW IT WORKS
water pressure, water filter, gauge, gauges, water pressure monitoring, water level, differential pressure, differential pressure transmitter, differential pressure sensor, differential pressure switch, pump, heat exchanger, pressure analytics, pressure monitoring, online pressure monitoring, internet pressure monitoring, mobile pressure monitoring, flow switch, pressure switch, distiller. winery, water purification, water treatment
SCADASCOPE takes most of the capabilities of hard-wired PLC-based pressure monitoring and control systems and makes them simple to operate, inexpensive enough for even the smallest businesses to adopt and quick to deploy without needing costly new infrastructure. SCADASCOPE works on a combination of Cellular, Radio, Internet and Microcontroller technology.
Our flagship 3G Cellular Internet Gateway can be deployed anywhere there is mobile phone network coverage. It can operate as a “stand alone” differential pressure sensor and device controller – or as the central hub of a network of Sensor Controllers in clusters of up to 50 units.
That’s control of 100 sample points and 50 external devices like pumps, solenoid valves or mains-rated relays - from one device that costs less than $550.00!
The 3G Cellular Internet Gateway can operate off mains power or a solar panel and rechargeable battery for remote installations. The Sensor Controllers can also be mains powered or run off AA batteries for up to a year depending on duty cycle (how often they sample).
Alternately, you can configure SCADASCOPE to operate off your WiFi router – meaning you save on 3G network costs – this is a great option if you have a reliable WiFi signal and mains power within 100 metres of your filters or other pressure sampling points.
SCADASCOPE is designed to save you money on infrastructure. The online Control Panel can be accessed by any internet capable computer with a browser – all configuration, data capture and visualisation is managed from here in a simple-to-use format anyone with basic internet skills can master. You set conditions for email or SMS alerts, control external devices and decide the format that your data will be displayed using simple modules. Administrators can grant or restrict access to different features and change them as required using the secure Control Panel system.
There’s no cabling or rewiring required in most cases, no new software to buy and little or no training required for operators. SCADASCOPE gets your assets online fast, reliably and as the system will be pre-configured to your requirements, you can install it yourself.
SCADASCOPE brings IoT (the Internet of Things) to industry.
HOW IT WORKS
SCADASCOPE takes most of the capabilities of hard-wired PLC-based pressure monitoring and control systems and makes them simple to operate, inexpensive enough for even the smallest businesses to adopt and quick to deploy without needing costly new infrastructure. SCADASCOPE works on a combination of Radio, Internet and Microcontroller technology.
SCADASCOPE brings IoT (the Internet of Things) to industry.
The process goes like this...
The process goes like this...
To get a better idea of the whole thing let’s take a look at a basic example...
To get a better idea of the whole thing let’s take a look at a basic example...
This filter bypass solution monitors differential pressure across a water filter and alerts an operator by email or SMS if the filter media is choking. If so, it automatically alters the flow state of a pair of magnetic pulse solenoid valves, diverting the flow through a bypass filter until the operator can attend the problem.
The filter bypass solution shown above monitors differential pressure across a water filter and alerts an operator by email or SMS if the filter media is choking. If so, it automatically alters the flow state of a pair of magnetic pulse solenoid valves, diverting the flow through a bypass filter until the operator can attend the problem.
... by the way, as a special introductory offer,this system would only cost you only $999.00 (Australian Dollars) for the SCADASCOPE stuff - see the Pricing page for details.
... by the way, this system would only cost you $999.00 (Australian Dollars) for the SCADASCOPE stuff - see the Pricing page for details.
THIS IS HOW IT WORKS
SCADASCOPE is operating in an ultra-low power mode. A pressure switch, installed in the pipe work and connected to the Master Controller is calibrated to detect dynamic pressure.
When water is flowing it triggers the pressure reading process.
SCADASCOPE is operating in an ultra-low power mode. A pressure switch, installed in the pipe work and connected to the Master Controller is calibrated to detect dynamic pressure. When water is flowing it triggers the pressure reading process.
The Master Controller takes a reading from its pressure sensor and transmits it to the Internet Gateway. This reading depicts the “high-side” or inflow pressure of the primary filter.
The water course is controlled by two magnetic pulse solenoids, while solenoid 1 is open water flows through the primary filter.
The Master Controller takes a reading from its pressure sensor and transmits it to the Internet Gateway. This reading depicts the “high-side” or inflow pressure of the primary filter. The water course is controlled by two magnetic pulse solenoids, while solenoid 1 is open water flows through the primary filter.
The SCADASCOPE Internet Gateway captures the reading from the Master Controller and transmits a ”wake up” message to a downstream SCADASCOPE Solenoid and Pressure Controller .
The SCADASCOPE Internet Gateway captures the reading from the Master Controller and transmits a ”wake up” message to a downstream SCADASCOPE Solenoid and Pressure Controller.
The SCADASCOPE Solenoid and Pressure Controller is connected to the "low-side" (outflow) pressure sensor of the primary filter. It takes a reading and transmits the data to the Internet Gateway - then returns to a low-power deep-sleep state.
The downstream SCADASCOPE Sensor Controller is connected to the "low-side" (outflow) of the primary filter. It takes a reading and transmits the data to the Internet Gateway - then returns to a low-power deep-sleep state.
The Internet Gateway broadcasts both sets of data to a secure Internet platform hosting the SCADASCOPE Control Panel, which can be accessed by a standard internet browser.
The Internet Gateway broadcasts both sets of data to a secure Internet platform hosting the SCADASCOPE Control Panel, which can be accessed by a standard internet browser.
The system operator has configured the control panel to display the inflow and outflow pressure across the filter and added an alert to respond if the pressure differential is greater than 15Psi.
In this case it is!
The system operator has configured the control panel to display the inflow and outflow pressure across the filter and added an alert to respond if the pressure differential is greater than 15Psi.
In this case it is!
The Internet Gateway relays a message from the control panel to the Sensor Controller, which closes Solenoid Valve 1 and opens Solenoid Valve 2. This diverts flow away from the choked primary filter to the bypass filter.
The Internet Gateway relays a message from the control panel to the Sensor Controller, which closes Solenoid Valve 1 and opens Solenoid Valve 2. This diverts flow away from the choked primary filter to the bypass filter.
The operator receives an email alert advising that the pressure differential readings across the primary filter suggest it is choking – and that it has been bypassed.
The operator receives an email alert advising that the pressure differential readings across the primary filter suggest it is choking – and that it has been bypassed.
The operator attends site and changes the fouled filter. The email includes a link to an internet button on the control panel that will revert the flow states of the solenoid valves, restoring flow through the primary filter.
The operator attends site and changes the fouled filter. The email includes a link to an internet button on the control panel that will turn off the solenoid valve, restoring flow through the primary filter.
To find out more about what SCADASCOPE can do for you call us or email.
Send us an email"
info@scadascope.com
OR
0412 888 825 (Australia)
+61 412 888 825 (international)